PC202 Series


This type of ozone generators’ cabinet is made of stainless steel. All of these type models are fully automatic tuning for constant ozone output and simplicity in installation.
The generators are floor mounted allowing easy inspection and, if required, convenient access for maintenance. On the back side, connectors for oxygen, ozone and all electrical connectors are located.
The generator can be start and stop and start-up automatically when used together with an external ozone switch. The generator comes with both digital inputs and outputs connectors allow users a variety of control. The generator can be connected to an external computer through Modbus network’s connector.
The ozone generator starts smoothly without drawing heavy surge currents from the power line, and the output can be adjusted easily from 5 to 100% of production. The control circuitry provides complete protection against excess voltages and currents within the inverter.
Noise Immunity-The high inherent noise immunity characteristics of the solid-state circuitry used in the inverter, virtually eliminate the possibility of erratic power supply operation initiated by spurious noise interference.


Material:
Material: Electrode, Stainless steel 316L Special glass, Viton.
Cabinet, Stainless steel 304          
Protection class: IP 22.
Low power consumption.
High reliability, safety and low maintenance.
Robust industrial quality for reliability and long service life.
Feed gas requirements vary depending on production rate and ozone concentration.
Feed gas inlet pressure: 0.2 to 1.2 bar (3 to 17 psi).
Compact design.


 

The range of PC202 Series:

Model

Max Production Air/O2 (Ng/h)

Air/O2 Flow rate(lpm)

Dimension HxWxD(mm)

Weight

PDF

PC202-25

10/25

10/5

700x270x130

10Kg